Repeat Copy; Preparing A Job For Repeat Copy - Kyocera TASKalfa 620 Operation Manual

Copying Functions

Repeat Copy

Enable additional copies in the desired quantity as necessary after a copy job is completed. For
confidential documents, you can set up a pass code for the use of Repeat Copy. In such a case, the
correct pass code must be entered when using Repeat Copy or copies will not be delivered.
NOTE: Repeat Copy job is cleared when the main power switch is turned off.
Repeat Copy cannot be selected when using document management functions or for copies with
form overlay.
Repeat Copy is not available when the copier is equipped with the optional security kit.
Depending on your needs, you can disable repeat copying or specify as the default mode. Refer to
Enabling Repeat Copy on page 3-16.

Preparing a Job for Repeat Copy

Follow the steps as below to prepare a job for repeat copies as needed.
1
Press [Function] and then [
2 Press [Repeat Copy].
3 Press [On].
For confidential jobs, press [# keys]
([#-Keys]) and enter the pass code.
NOTE: Enter the pass code from 1 to 8
digits.
If you forget the pass code, Repeat
Copy will be unavailable. Take note if
necessary.
4
Place the originals in the document processor or on the platen. Press the Start key to start copying
and register this job as a Repeat Copy job.
1-42
Down].
Ready to copy.
Auto Image
Rotation
EcoPrint
Repeat
Copy
Basic
Ready to copy.
Repeat Copy
Off
On
OHP Memo
Proof Copy
Backing Pages
Original Negative Mirror
Orient. Image Image
Output Staple Multi-page
Tray /Punch Form
User choice Program
Function
Shortcut
When select [On], job can be saved
You can recall and re-print at anytim
You can set a password to secure sa
document .
Paper Size
11x8
100%
Up
Down
Paper Size
11x8
100%
Back