Original Orientation - Kyocera TASKalfa 620 Operation Manual

Copying Functions

Original Orientation

Specify the original orientation to use these functions.
•
•
•
•
•
•
•
•
•
•
•
When placing originals on the platen
When placing originals in the document processor
NOTE: You can change the default setting for the original orientation. Refer to Orientation of
Original Document on page 3-27 for details.
Follow the steps as below to specify the original orientation.
1 Place the originals in the document processor or on the platen.
2 Press [Function] and [
1-8
Duplex mode
Split mode (separate copies from two-sided originals)
Margin mode
Centering originals
Border erase
Combine mode
Memo mode
Page numbering
Booklets
Stapling (optional feature)
Punching (optional feature)
Originals
Originals
Down] to move to the second page.
Rear
Rear
Left
Left