Margin Mode And Centering Originals - Kyocera TASKalfa 620 Operation Manual

Copying Functions
Repeat Copy
Specify Repeat Copy as follows. Use Repeat Copy to enable the production of additional copies as
needed after a copy job is completed.
1 Press [Edit]. On the next screen, press
[Repeat Copy].
NOTE: The Repeat Copy setting
applies to all other steps. Simply
complete this setting once as an initial
step.
2
Press [On] to activate Repeat Copy.
Refer to Repeat Copy on page 1-42 for
details.
3 Press [Close].

Margin Mode and Centering Originals

Specify the Margin mode and centering of originals as follows.
1 Press [Edit]. On the next screen, press
[Margin/Centering] ([Margin/Imag.Shift]).
NOTE: The Margin mode and
centering settings apply to all other
steps. Simply complete this setting
once as an initial step.
2
Press [Margin] or [Centering] ([Image
shift]). For details, refer to Margin Mode
on page 1-18 or Centering Originals on
page 1-20.
3 Press [Close].
1-74
Ready to Job build.
Place originals then press Start key .
Job Build Step
Auto
Off
Border Original Repeat
Erase Orig.Size Copy
Off Off
Margin/ Output
Page #
Centering Tray
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Repeat Copy
Off
On
Ready to Job build.
Place originals then press Start key .
Job Build Step
Auto
Off
Border Original Repeat
Erase Orig.Size Copy
Off Off
Margin/ Output
Page #
Centering Tray
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Margin/Centering
Off
Margin
Centering
Off
1 sided copy -Left
Tray A
Finished page #:
Edit
Back
When select [On], job can be save
You can recall and re-print at anyt
You can set a password to secure
document .
Off
1 sided copy -Left
Tray A
Finished page #:
Edit
Back
Reposition image to left /right or
top/bottom, and also center imag
on paper .