Punching - Kyocera TASKalfa 620 Operation Manual

Punching

Punch holes in sets of finished copies in preparation for binding.
NOTE: Punching requires the optional document finisher and punching unit.
The orientations of the original and corresponding punch positions are as follows.
NOTE: The inch model provides two-hole and three-hole punching. The metric model provides
two-hole and four-hole punching.
Follow the steps as below for punching.
1
Press [Function] and then [
2 Press [Staple/Punch].
Originals
Two Holes (Left/Right)
Two Holes (Top)
Two Holes (Left/Right)
Two Holes (Top)
Copies
Down].
Ready to copy.
Auto Image
Rotation
EcoPrint
Repeat
Copy
Basic
Copying Functions
Orientation of Original
Platen
OHP Memo
Proof Copy
Backing Pages
Original Negative Mirror
Orient. Image Image
Output Staple Multi-page
Tray /Punch Form
User choice Program
Function
Document
Processor
Paper Size
11x8
100%
Up
Down
1-13