Margin Width Default Value; Border Erase Width Default Value - Kyocera 1650 Advanced Operation Manual

System Menu
5 Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.

Margin Width Default Value

Set the default value of the margin width.
1 Display the Copy Default screen. (See
2 Press the
Width.
3
Press the Enter key.
4
Press the
of margin width. You can set the value to 1/8" to 3/4" in
1/8" increments [1 mm to 18 mm in 1 mm increments].
5 Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.

Border Erase Width Default Value

Set the default value of the border erase width.
1
Display the Copy Default screen. (See
2 Press the
BorderEraseWidth [Border Er. width].
3 Press the Enter key.
4
Press the
of border erase width. You can set the value to 1/8" to
3/4" in 1/8" increments [1 mm to 18 mm in 1 mm
increments].
5 Press the Enter key.
6 Press the Reset key. The message display returns to the copier basic screen.
3-10
key or the key to select Margin
key or the key to set the default value
key or the key to select
key or the key to set the default value
How to Display the Copy Default Screen
Copy Default :
Offset
Auto Rotation
Margin Width
Margin width:
1/4"
How to Display the Copy Default Screen
Copy Default :
Auto Rotation
Margin Width
BorderEraseWidth
Border Erase width:
1/4"
on page 3-2.)
: Off
: On
: 1/4"
1/8" 3/4"
on page 3-2.)
: On
: 1/4"
: 1/4"
1/8" 3/4"