Storing Print Media; Identifying Print Media Sources And Specifications; Print Media Sizes And Support - Dell 3110CN Owner's Manual

• Do not use label sheets that have adhesive to the edge of the sheet. Dell recommends zone
coating of the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive material
contaminates your printer and could void your warranty.
• If zone coating of the adhesive is not possible, a 3 mm (0.125 in.) strip should be removed on
the leading and driver edge, and a non-oozing adhesive should be used.
• Remove a 3 mm (0.125 in.) strip from the leading edge to prevent labels from peeling inside
the printer.
• Portrait orientation is preferred, especially when printing bar codes.
• Do not use labels that have exposed adhesive.

Storing Print Media

For proper print media storage, the following guidelines help avoid media feeding problems and
uneven print quality.
• For best results, store print media in an environment where the temperature is approximately
21°C (70°F) and the relative humidity is 40%.
• Store cartons of print media on a pallet or shelf, rather than directly on the floor.
• If you store individual packages of print media out of the original carton, make sure they rest
on a flat surface so that the edges do not buckle or curl.
• Do not place anything on top of the print media packages.

Identifying Print Media Sources and Specifications

The following tables provide information on standard and optional print media sources.

Print Media Sizes and Support

A4
A5
B5
Letter
Folio
(8.5 x 13 in.)
Legal
(8.5 x 14 in.)
Executive
18
Print Media Guidelines
Multipurpose feeder Standard 250-sheet tray
Y
Y
Y
Y
Y
Y
Y
Optional 550-sheet
feeder
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Optional duplexer
Y
Y
Y
Y
Y
Y
Y