Viewing The Rmon History Table - Cisco SGE2000 - - Gigabit Switch Administration Manual

Viewing Statistics
Configuring RMON History
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Edit RMON History Page
Edit RMON History Page
The
•
History Entry No. — Displays the entry number for the History Control Table
page.
•
Source Interface — Displays the interface (port or LAG) from which the history
samples are taken. The possible field values are:
-
Port
— Specifies the port from which the RMON information is taken.
-
LAG
— Specifies the LAG from which the RMON information is taken.
•
Owner — Displays the RMON station or user that requested the RMON
information. The field range is 0-20 characters.
•
Max No. of Samples to Keep — Indicates the number of samples to save.
•
Sampling Interval — Indicates the time in seconds that samplings are taken
from the ports. The field range is 1-3600. The default is 1800 seconds (equal to
30 minutes).
Define the relevant fields.
Click Apply. The history control settings are modified, and the device is updated.

Viewing the RMON History Table

RMON History Table Page
The
samplings. Each table entry represents all counter values compiled during a single
sample.
contains the following fields:
contains interface specific statistical network
17
375