Cisco SGE2000 - - Gigabit Switch Administration Manual page 184

Configuring VLANs
Defining GVRP Settings
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Edit GVRP Page
Edit GVRP Page
The
•
Interface — Port or LAG described by the GVRP settings entry.
•
GVRP State — Indicates if GVRP is enabled on the interface. The possible field
values are:
-
Enable
— Enables GVRP on the selected interface.
-
Disable
— Disables GVRP on the selected interface.
•
Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on
the interface. The possible field values are:
-
Enable — Enables Dynamic VLAN creation on the interface.
-
Disable
— Disables Dynamic VLAN creation on the interface.
•
GVRP Registration — Indicates if VLAN registration through GVRP is enabled
on the device. The possible field values are:
-
Enable
— Enables GVRP registration on the device.
-
Disable
— Disables GVRP registration on the device.
Define the relevant fields.
Click Apply. GVRP settings are modified, and the device is updated.
contains the following fields:
6
175