Click The Edit Button. The Edit Ip Based Acl Page; Edit Ip Based Acl Page; The Edit Ip Based Acl Page Contains The Following Fields; Acl Name - Displays The User-Defined Ipv6 Based Acls - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Device Security
Defining Access Control
STEP 1
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Modifying IPv6 Based ACL
Click Security Suite >Access Control > IPv6 Based ACL. The
Page opens.
Click the Edit button. The
Edit IPv6 Based ACL Page
The Edit IPv6 Based ACL Page contains the following fields:
•
ACL Name — Displays the user-defined IPv6 based ACLs.
•
Rule Priority — Indicates the rule priority, which determines which rule is

matched to a packet on a first-match basis.

•
Protocol — Creates an ACE based on a specific protocol. For a list of available
protocols, see the Protocol field description in the
above.
•
Source Port — Defines the TCP/UDP source port to which the ACE is matched.
This field is active only if 800/6-TCP or 800/17-UDP are selected in the Select
from List drop-down menu. The possible field range is 0 - 65535.
•
Destination Port — Defines the TCP/UDP destination port. This field is active
only if 800/6-TCP or 800/17-UDP are selected in the Select from List drop-
down menu. The possible field range is 0 - 65535.

Edit IP Based ACL Page

Edit IPv6 Based ACL
opens:
IPv6 Based ACL Page
4
119