Defining Sntp Authentication - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring System Time

Defining SNTP Authentication

STEP 3
STEP 4
Defining SNTP Authentication
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
Encryption Key ID — Select if Key Identification is used to communicate
between the SNTP server and device. The range is 1 - 4294967295.
Define the relevant fields.
Click Add. The SNTP Server is added, and the device is updated.
SNTP Authentication Page
The
of the SNTP server.
Click System > System Management > Time > SNTP Authentication. The
Authentication Page
SNTP Authentication Page
SNTP Authentication Page
The
•
Enable SNTP Authentication — Indicates if authenticating an SNTP session
between the device and an SNTP server is enabled on the device. The
possible field values are:
provides parameters for performing authentication
opens:
contains the following fields:
3
SNTP
39