Viewing Remote Logs - Cisco SGE2000 - - Gigabit Switch Administration Manual

Managing System Logs

Viewing Remote Logs

Viewing Remote Logs
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Remote Log Servers Page
The
the Remote Log Servers. New log servers and the minimum severity level of
events sent to them may be added.
Click Admin > Logs > Remote Log Servers. The
Remote Log Servers Page
Remote Log Servers Page
The
•
Server — Specifies the server IP address to which logs can be sent.
•
UDP Port — Defines the UDP port to which the server logs are sent. The
possible range is 1 to 65535. The default value is 514.
•
Facility — Defines a user-defined application from which system logs are sent
to the remote server. Only one facility can be assigned to a single server. If a
second facility level is assigned, the first facility is overridden. All applications
defined for a device utilize the same facility on a server. The field default is
Local 7. The possible field values are Local 0 - Local 7.
•
Description — Provides a user-defined server description.
•
Minimum Severity — Indicates the minimum severity level for logs that are sent
to the server. For example, if Notice is selected, all logs from a Notice severity
and higher are sent to the remote server.
contains information for viewing and configuring
Remote Log Servers Page
contains the following fields:
16
opens:
355