Cisco SGE2000 - - Gigabit Switch Administration Manual page 250

Configuring Multicast Forwarding
Defining Multicast Group
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Edit Multicast Group Page
Edit Multicast Group Page
The
•
VLAN ID — Displays the VLAN ID.
•
Bridge IP Multicast — Displays the IP address attached to the Multicast Group.
•
Bridge MAC Multicast — Displays the MAC address attached to the Multicast
Group.
•
Interface — Displays the interface attached to the Multicast Group.
•
Interface Status — Defines the interface status. The options are as follows:
-
Static
— Attaches the interface to the Multicast group as static member
in the Static Row. The interface has joined the Multicast group statically
in the Current Row.
-
Forbidden
even if IGMP Snooping designated the interface to join a Multicast
group.
-
None
— The interface is not part of a Multicast group.
Change the Interface Status.
Click Apply. The Multicast Group parameters are saved, and the device is
updated.
contains the following fields:
— Forbidden interfaces are not included the Multicast group,
9
241