Managing Qos Statistics; Viewing Policer Statistics - Cisco SGE2000 - - Gigabit Switch Administration Manual

Viewing Statistics

Managing QoS Statistics

STEP 3
STEP 4
Managing QoS Statistics
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
Falling Threshold — Displays the falling counter value that triggers the falling
threshold alarm. The falling threshold is graphically presented on top of the
graph bars. Each monitored variable is designated a color.
•
Falling Event — Selects an event which is defined in the Events table that
triggers the falling threshold alarm. The Events Table is displayed in the
Events Page
.
•
Startup Alarm — Displays the trigger that activates the alarm generation.
Rising is defined by crossing the threshold from a low-value threshold to a
higher-value threshold.
-
Rising Alarm
alarm.
-
Falling Alarm
threshold alarm.
-
Rising and Falling
alarm.
•
Interval — Defines the alarm interval time in seconds.
•
Owner — Displays the device or user that defined the alarm
Define the relevant fields.
Click Apply. The RMON alarms are modified, and the device is updated.
The QoS Statistics section contains the following :
•

Viewing Policer Statistics

•
Viewing Aggregated Policer Statistics
•
Viewing Queues Statistics
Viewing Policer Statistics
Policer Statistics Page
The
packets that are received on an interface.
— The rising counter value that triggers the rising threshold
— The falling counter value that triggers the falling
— The rising and falling counter values that trigger the
indicates the amount of in-profile and out-of-profile
17
RMON
387