Cisco SGE2000 - - Gigabit Switch Administration Manual page 60

Configuring Device Security
Defining Authentication
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Security Suite > Authentication > TACACS+. The
TACACS+ Page
TACACS+ Page
The
•
Supported IP Format — TACACS+ is supported only on IPv4.
•
Source IPv4 Address — Displays the device source IPv4 address used for the
TACACS+ session between the device and the TACACS+ server.
•
Key String — Defines the authentication and encryption key for TACACS+
server. The key must match the encryption key used on the TACACS+ server.
•
Timeout for Reply — Displays the amount of time that passes before the
connection between the device and the TACACS+ server times out. The field
range is 1-30 seconds.
The following parameters are configured for each TACACS+ server:
•
Host IP Address — Displays the TACACS+ Server IP address.
•
Priority — Displays the order in which the TACACS+ servers are used. The
default is 0.
•
Source IP Address — Displays the device source IP address used for the
TACACS+ session between the device and the TACACS+ server.
•
Authentication Port — Displays the port number through which the TACACS+
session occurs. The default is port 49.
contains the following fields:
4
TACACS+ Page
opens:
51