Configuring Lacp - Cisco SGE2000 - - Gigabit Switch Administration Manual

Aggregating Ports

Configuring LACP

Configuring LACP
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Aggregate ports can be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed, set to full-duplex operations.
Aggregated Links can be manually setup or automatically established by enabling
Link Aggregation Control Protocol (LACP) on the relevant links. Aggregate ports
can be linked into link-aggregation port-groups. Each group is comprised of ports
with the same speed.
To define LACP:
Click Bridging > Port Management > LACP. The
LACP Page
LACP Page
The contains fields for configuring LACP LAGs.
•
LACP System Priority — Indicates the global LACP priority value. The possible
range is 1- 65535. The default value is 1.
•
Unit Number — Displays the stacking member for which LACP information is
defined.
•
Port — Defines the port number to which timeout and priority values are
assigned.
LACP Page
opens:
18
400