Cisco SGE2000 - - Gigabit Switch Administration Manual page 133

Configuring Device Security
Defining DoS Prevention
STEP 1
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Security Suite > DoS Prevention > Global Settings. The
opens:
Global Settings Page
Global Settings Page
The
•
Security Suite Status — Indicates if DoS security is enabled on the device. The
possible field values are:
•
Enabled
— Enables DoS security.
•
Disabled
— Disables DoS security on the device. This is the default value.
•
Denial of Service Protection — Indicates if any of the services listed below are
enabled. If the service protection is disabled, the
Invasor Trojan
, and
•
Stacheldraht Distribution — Discards TCP packets with source TCP port equal
to 16660
•
Invasor Trojan — Discards TCP packets with destination TCP port equal to
2140 and source TCP port equal to 1024.
•
Back Orifice Trojan — Discards UDP packets with destination UDP port equal
to 31337 and source UDP port equal to 1024.
Define the relevant fields.
contains the following fields:
Back Orifice Trojan
fields are disabled.
Global Settings Page
Stacheldraht Distribution
4
,
124