Cisco SGE2000 - - Gigabit Switch Administration Manual page 243

Defining Address Tables
Defining Dynamic Addresses
STEP 2
STEP 3
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
Aging Interval — Specifies the amount of time the MAC address remains in the
Dynamic MAC Address table before it is timed out, if no traffic from the source
is detected. The default value is 300 seconds.
•
Clear Table — If checked, clears the MAC address table.
Query By
In the Query By section, select the preferred option for sorting the addresses
table:
•
Interface — Specifies the interface for which the table is queried. The query
can search for specific ports or LAGs.
•
MAC Address — Specifies the MAC address for which the table is queried.
•
VLAN ID — Specifies the VLAN ID for which the table is queried.
•
Address Table Sort Key — Specifies the means by which the Dynamic MAC
Address Table is sorted. The address table can be sorted by address, VLAN, or
interface.
Define the relevant fields.
Click Query. The Dynamic MAC Address Table is queried, and the results are
displayed.
8
234