Chapter 5: Configuring Ports; Configuring Ports Settings For Layer 2 Enabled Devices - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Ports

Configuring Ports Settings for Layer 2 Enabled Devices

Configuring Ports
Configuring Ports Settings for Layer 2 Enabled Devices
Cisco Small Business SFE/SGE Managed Switches Administration Guide
This section contains information for configuring ports and contains the following
topics:
•
Configuring Ports Settings for Layer 2 Enabled Devices
•
Configuring Ports Settings for Layer 3 Enabled Devices
Port Settings Page
The
Layer 3 mode (definable on the device through the CLI interface).
Layer 2 devices support Private VLAN Edge, which can be enabled for individual
Edit Port Page
ports on the
Port Settings Page
The
settings (Layer 2):
varies, depending on whether the device is in Layer 2 or
.
contains fields for defining port parameters. To define port
5
151