Managing System Files
Save Configuration
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
was started or rebooted. When the device shuts down or reboots the next time,
this configuration becomes the Starting Configuration.
•
Starting configuration — Contains the parameter definitions which were valid
in the Running Configuration when the system last rebooted or shut down.
•
Backup configuration — Contains a copy of the system configuration for
protection against system shutdown, or for maintenance of a specific operating
state.
File names cannot contain slashes (\ or /), the leading letter of the file name should
not be a period (.), and the maximum length for file names on the TFTP server is
127 characters or 31 characters for files on the switch. (Valid characters: A-Z, a-z,
0-9, ".", "-", "_"). In the
system configuration files.
Click Admin > File Management > Save Configuration. The
Page
opens:
Save Configuration Page
Save Configuration Page
The
•
via TFTP — Download and upload files using TFTP.
•
via HTTP — Download and upload files using HTTP.
Save Configuration Page
contains the following fields:
, define the parameters of the
Save Configuration
13
332