Cisco SGE2000 - - Gigabit Switch Administration Manual page 207

Configuring IP Information
IP Addressing
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
To define an IPv6 ISATAP tunnel: Click > System > System Management > IP
Addressing > IPv6 Configuration > ISATAP Tunnel. The
ISATAP Tunnel Page
ISATAP Tunnel Page
The
•
ISATAP Status — Enables IPv6 over IPv4 ISATAP tunneling. Once ISATAP is
enabled, an ISATAP interface is created. The possible field values are:
-
Enable — Enables ISATAP tunnel on the device.
-
Disable
— Disables ISATAP tunnel on the device. This is the default
value.
•
Tunnel Router's Domain Name
specific automatic tunnel router domain name. The default value is ISATAP.
-
Use Default —
•
Query Interval (10-3600)
(before the IP address of the ISATAP router is known) for the automatic tunnel
router domain name. The range is 10 - 3600 seconds. The default is 10
seconds.
-
Use Default —
contains the following fields:
—
Specifies a global string that represents a
Selecting the check box that returns settings to default.
— Specifies the interval between DNS Queries
Selecting the check box that returns settings to default.
ISATAP Tunnel Page
opens:
7
198