Cisco SGE2000 - - Gigabit Switch Administration Manual page 366

Managing System Logs
Viewing Remote Logs
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Add Syslog Server Page
The Add Syslog Server Page
Servers.
Add Syslog Server Page
The
•
Supported IP Format — Provides the supported IP format: Version 6 or Version
4.
•
IPv6 Address type — Indicates the IPv6 Type. The possible field values are:
-
Link Local — Indicates the IPv6 address is link-local.
-
Global
— Indicates the IPv6 address is global Unicast.
•
Link Local Interface — Indicates the Link Local Interface. The possible field
values are:
-
— Indicates Link Local interface.
-
ISATAP — Indicates a ISATAP tunnel is a Link Local interface.
•
Log Server IP Address — Specifies the server to which logs can be sent.
•
UDP Port — Defines the UDP port to which the server logs are sent. The
possible range is 1 to 65535. The default value is 514.
•
Facility — Defines a user-defined application from which system logs are sent
to the remote server. Only one facility can be assigned to a single server. If a
second facility level is assigned, the first facility is overridden. All applications
defined for a device utilize the same facility on a server. The field default is
Local 7. The possible field values are Local 0 - Local 7.
contains fields for defining new Remote Log
contains the following fields:
16
357