Cisco SGE2000 - - Gigabit Switch Administration Manual page 161

Configuring Ports
Configuring Ports Settings for Layer 2 Enabled Devices
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Bridging > Port Management > Port Settings. The Port Settings Page opens:
Port Settings Page
The Port Settings Page contains the following fields:
•
Copy From Entry Number — Copies the port configuration from the specified
table entry.
•
To Entry Number(s) — Assigns the copied port configuration to the specified
table entry.
•
Unit Number — Indicates the stacking member for which the ports are defined.
•
Interface — Displays the port number.
•
Port Type — Displays the port type. The possible field values are:
-
1000M
— Copper (copper cable).
-
1000M
— ComboC (combo port with copper cable 3).
-
1000M
— ComboF (combo port with optic fiber cable).
-
Fiber
— Indicates the port has a fiber optic port connection.
•
Port Status — Displays the port connection status. The possible field values
are:
-
Up
— Port is connected.
5
152