Configuring IP Information
IP Addressing
STEP 3
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click Apply. ARP Proxy is enabled, and the device is updated.
Defining UDP Relay (Layer 3)
The UDP Relay allows UDP packets to reach other networks. This feature enables
browsing from workstations to servers on different networks. This section is
applicable to Layer 3 devices only.
To define UDP Relay:
Click System > System Management > IP Addressing > UDP Relay. The
UDP Relay Page
opens:
Defining UDP Relay Page
Defining UDP Relay Page
The
•
Source IP Interface — Indicates the input IP interface that relays UDP packets.
If this field is 255.255.255.255, UDP packets from all interfaces are relayed. The
following address ranges are
-
0.0.0.0 to 0.255.255.255.
-
127.0.0.0 to 127.255.255.255.
contains the following fields:
7
Defining
210