Configuring IP Information
IP Addressing
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
IP Address — The currently configured IP address.
•
Network Mask — Displays the currently configured IP address mask.
•
Prefix Length — Specifies the length of the IPv6 prefix. The range is 5 -128 (64
in the case EUI-64 parameter is used). The
the IPV6 Static IP Address is defined as a Global IPv6 Address.
•
User Defined Default Gateway — Manually defined default gateway IP
address.
•
Active Default Gateway — Active default gateway's IP Address.
•
Remove User Defined — Removes the selected IP address from the interface.
The possible field values are:
-
Checked
— Removes the IP address from the interface.
-
Unchecked
Click Apply. The IP Interface settings are defined, and the device is updated.
Defining IPv4 Interface (Layer 3)
IPv4 Interface Page
The
forwarded to the default IP when frames are sent to a remote network. The
configured IP address must belong to the same IP address subnet of one of the IP
interfaces. This section is applicable to Layer 3 devices only.
— Maintains the IP address assigned to the Interface.
contains fields for assigning IPv4 addresses. Packets are
Prefix
field is applicable only when
7
206