Cisco SGE2000 - - Gigabit Switch Administration Manual page 232

Configuring IP Information
IP Addressing
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Add IP Static Route Page
In addition to the fields in the
contains the following additional fields:
•
Destination IP Address — Defines the destination IP address.
•
Network Mask — Defines the currently configured IP address mask.
•
Prefix Length —Defines the IP route prefix for the destination IP. The prefix
length must be preceded by a forward slash (/).
•
Next Hop — Defines the next hop's IP address or IP alias on the route.
•
Route Type —Defines the route type. The possible field values are:
-
Reject
— Rejects the route, and stops routing to the destination network
via all gateways.
-
Remote
— Indicates the route is a remote path.
•
Metric(1-255)— Defines the administrative distance to the next hop. The range
is 1-255. The default value is 1.
Define the relevant fields.
Click Apply. The IP Static route is added, and device is updated.
IP Static Routing Page, the Add IP Static Route Page
7
223