Defining General Settings; Defining Cos - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Quality of Service

Defining General Settings

Defining General Settings
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
Traffic Classification — Classifies each incoming packet as belonging to a
given traffic class, based on the packet contents and/or the context.
•
Assignment to Hardware Queues — Assigns incoming packets to forwarding
queues. Packets are sent to a particular queue for handling as a function of the
traffic class to which they belong, as defined by the classification mechanism.
•
Traffic Class-Handling Attributes — Applies QoS/CoS mechanisms to different
classes, including: Bandwidth Management
The Quality of Service section contains the following topics:
•
Defining General Settings
•
Defining QoS Basic Mode
The QoS General Settings section contains the following :
•

Defining CoS

•
Defining QoS Queue
•
Mapping CoS to Queue
•
Mapping DSCP to Queue
•
Configuring Bandwidth
Defining CoS
The CoS Page contains fields for enabling or disabling CoS (Basic or Advanced
mode). In addition, the default CoS for each port or LAG is definable.
11
274