Modifying Vlan Interface Settings - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring VLANs
Defining VLAN Interface Settings
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
-
Disable
— Ingress filtering is not activated on the port.
•
Multicast TV VLAN — Indicates if a Multicast TV VLAN is enabled on the
device. Multicast TV VLANs enable VLANs to receive Multicast TV
transmissions from ports that are not Access ports. The possible values are:
-
Enable
— Multicast TV VLAN is activated on the port.
-
Disable
— Multicast TV VLAN is not activated on the port.

Modifying VLAN Interface Settings

Click the Edit button. The
Edit VLAN Ports Page
Edit VLAN Ports Page
The
•
Interface — The port or LAG associated with this VLAN interface configuration.
•
VLAN Mode — Indicates the port mode. Possible values are:
-
General
— The port can be tagged and untagged with members of one
or more VLANs. (full 802. 1 Q mode).
-
Access
— The port belongs to a single untagged VLAN. When a port is
in Access mode, the packet types which are accepted on the port
(packet type) cannot be designated. It is also not possible to enable/
disable ingress filtering on an access port.
-
Trunk
— The port can be member of one or more VLANs. It is an
untagged member of at most one VLAN, and is a tagged member of all
other VLANs it is a member of.
Edit VLAN Ports Page
contains the following fields:
opens:
6
178