Configuring Dscp Mapping - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Quality of Service
Defining Advanced QoS Mode
Cisco Small Business SFE/SGE Managed Switches Administration Guide
After assigning packets to a specific queue, services such as configuring output
queues for the scheduling scheme, or configuring output shaping for burst size,
CIR, or CbS per interface or per queue, can be applied.
Advanced Mode
The
•

Configuring DSCP Mapping

•
Defining Class Mapping
•
Defining Aggregate Policer
•
Configuring Policy Table
•
Defining Policy Binding
Configuring DSCP Mapping
The DSCP Mapping Page
(DSCP) values from incoming packets to DSCP values in outgoing packets. The
DSCP values can be modified only within the queue range. This information is
important when traffic exceeds user-defined limits.
To map DSCP values:
section contains the following topics:
enables mapping Differentiated Services Code Point
11
286