Cisco SGE2000 - - Gigabit Switch Administration Manual page 237

48-port 10/100/1000 sfe/sge managed switches
Hide thumbs Also See for SGE2000 - Cisco - Gigabit Switch:
Table of Contents

Advertisement

Configuring IP Information
Domain Name System
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Add Host Name Page
The
Add Host Name Page
Supported IP Format — Indicates the IP address format supported by the host.
The possible field values are:
-
Version 6
— Indicates that the host supports IPv6 addresses.
-
Version 4
— Indicates that the host supports IPv4 addresses only.
IPv6 Address Type — Indicates the IPv6 Type. The possible field values are:
-
Link-Local
— Indicates the IPv6 address is link-local.
-
Global Unicast
Link Local Interface — Indicates the IPv6 link-local interface. The possible field
values are:
-
VLAN
— Indicates that VLAN is the IPv6 link-local interface.
-
ISATAP
— Indicates that the IPv6 link-local interface is defined as a
virtual IPv6 local link via ISATAP.
Host Name — Displays a user-defined default domain name. When defined, the
default domain name is applied to all unqualified host names. The
field can contain up to 158 characters.
IP Address — Displays the DNS host IP address.
IP Address 2 (optional) — Indicates the second IPv6 network assigned to the
interface. The address must be a valid IPv6 address, specified in hexadecimal
using 16-bit values between colons.
contains the following fields:
— Indicates the IPv6 address is global Unicast.
7
Host Name
228

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sge2000pSge2010Sfe2010Sfe2000

Table of Contents