Defining Mstp Interface Settings - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring Spanning Tree
Defining Multiple Spanning Tree
STEP 2
STEP 3
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
Designated Root Bridge ID — Indicates the priority and MAC address of the
bridge with the lowest path cost to the instance ID.
•
Root Port — Indicates the selected instance's root port.
•
Root Path Cost — Indicates the selected instance's path cost.
•
Bridge ID — Indicates the priority and MAC address of the selected instance.
•
Remaining Hops — Indicates the number of hops remaining to the next
destination.
Define the relevant fields.
Click Apply. The MSTP Instance configuration is defined, and the device is
updated.

Defining MSTP Interface Settings

Network Administrators can define MSTP Instances settings using the
Interface Settings Page .
10
MSTP
267