Cisco SGE2000 - - Gigabit Switch Administration Manual page 298

Configuring Quality of Service
Defining Advanced QoS Mode
STEP 2
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click the Add button. The
Add QoS Class Map Page
Add QoS Class Map Page
The
•
Class Map Name — Defines a new Class Map name
•
IP ACL — Matches packets to IP based ACLs first, then matches packets to
MAC based ACLs. Select either an IPv4 ACL or an IPv6 ACL.
•
Match — Criteria used to match IP addresses and /or MAC addresses with an
ACL's address.The possible field values are:
-
And
— Both the MAC-based and the IP-based ACL must match a
packet.
-
O
r — Either the MAC-based or the IP-based ACL must match a packet.
•
MAC ACL — Matches packets to MAC based ACLs first, then matches packets
to IP based ACLs.
•
Preferred ACL — Defines if packets are first matched to an IP based ACL or a
MAC based ACL. The possible field values are:
-
IP Based ACLs
packets to MAC based ACLs.
-
MAC Based ACLs
matches packets to IP based ACLs.
Define the relevant fields.
Click Apply. The device is updated.
Add QoS Class Map Page
contains the following fields.
— Matches packets to IP based ACLs first, then matches
— Matches packets to MAC based ACLs first, then
11
opens:
289