Managing Device Information
Managing Stacks
STEP 1
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click System > System Management > Stack Management.
opens:
Stack Management Page
Stack Management Page
The
•
Master Election — Indicates the method of electing the master device. The
possible values are:
-
Automatically
-
Force Maste
only Unit 1 or Unit 2 can be the stack master.
•
Unit No. — Displays the stacking member unit number for which the stacking
parameters are displayed.
•
Model Name — Displays the model name of ports supported by the system.
•
Unit No. After Reset — Indicates the new unit number of the stacking member
after the device is reset.
•
Uplink — Indicates the next higher stacking unit in the uplink path.
•
Downlink — Indicates the next lower stacking unit in the downlink path.
Define the relevant fields.
contains the following fields:
— The master is selected automatically by software.
r — The unit is forced to be master of the stack. Note that
Stack Management Page
The
2
24