Defining A Protocol Port - Cisco SGE2000 - - Gigabit Switch Administration Manual

Configuring VLANs

Defining a Protocol Port

STEP 3
STEP 4
Defining a Protocol Port
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Edit Protocol Group Page
Edit Protocol Group Page
The
•
Frame Type — Displays the packet type.
•
Protocol Value — Displays the User-defined protocol value.
•
Group ID (Hex) — Defines the Protocol group ID to which the interface is
added. The possible value range is 1-2147483647 in hexadecimal format.
Define the relevant fields.
Click Apply. The Protocol group is modified, and the device is updated.
Protocol Port Page
The
supported in Layer 3 mode.
To define the protocol port:
contains the following fields.
adds interfaces to Protocol groups. Protocol ports are
6
187