Cisco SGE2000 - - Gigabit Switch Administration Manual page 201

Configuring IP Information
IP Addressing
STEP 1
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Click System > System Management > IP Addressing > IPv6 Configuration > IPv6
Interface . The IPv6 Interface Page opens:
IPv6 Interface Page
The IPv6 Interface Page contains the following fields:
•
Interface — Indicates the Link Local Interface. The possible field values are:
-
VLAN — Indicates VLAN is the Link Local interface.
-
ISATAP Tunnel — Indicates a ISATAP tunnel is a Link Local interface.
•
IPv6 Type — Displays the IPv6 Type. The possible field values are:
-
Link-Local — Indicates the IPv6 address is link-local.
-
Global Unicast — Indicates the IPv6 address is global Unicast.
•
IPv6 Address — Indicates the IPv6 address assigned to the interface. Up to
five IP addresses can be set per interface, with the limitation that up to 128
addresses can be set per system. The address must be a valid IPv6 address,
specified in hexadecimal using 16-bit values between colons.
•
Prefix — Indicates the length of the IPv6 prefix. The length is a decimal value
that indicates how many of the high-order contiguous bits of the address
comprise the prefix (the network portion of the address). The possible field
values are 5-128.
•
DAD Status — Displays the current DAD status. The possible field values are:
7
192