Modifying Port Mirroring - Cisco SGE2000 - - Gigabit Switch Administration Manual

Managing Device Diagnostics
Configuring Port Mirroring
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Define the relevant fields.
Click Apply. Port mirroring is added, and the device is updated.

Modifying Port Mirroring

Click Admin > Diagnostics > Port Mirroring. The
Click the Edit Button. The
Edit Port Mirroring Page
The Edit Port Mirroring Page
•
Source Port — Indicates the port from which traffic is to be analyzed.
•
Type — Defines the port mode configuration for port mirroring. The possible
field values are:
-
RxOnly
— Defines the port mirroring on receiving ports. This is the
default value.
-
TxOnly
— Defines the port mirroring on transmitting ports.
-
Tx and Rx
— Defines the port mirroring on both receiving and
transmitting ports.
Define the relevant fields.
Click Apply. The Port mirroring is modified, and the device is updated.
Edit Port Mirroring Page
contains the following fields:
Port Mirroring Page
opens:
opens:
15
347