Cisco SGE2000 - - Gigabit Switch Administration Manual page 98

Configuring Device Security
Defining 802. 1 X
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
-
Forward
— Forwards the packet.
-
Discard
— Discards the packets. This is the default value.
-
Shutdown
— Discards the packets and shuts down the port. The ports
remains shut down until reactivated, or until the device is reset.
•
Traps — Indicates if traps are enabled for Multiple Hosts. The possible field
values are:
-
Enable
— Indicates that traps are enabled for Multiple hosts.
-
Disable
— Indicates that traps are disabled for Multiple hosts.
•
Trap Frequency — Defines the time period by which traps are sent to the host.
The Trap Frequency (1-1000000) field can be defined only if multiple hosts are
disabled. The default is 10 seconds.
•
Status — Indicates the host status. If there is an asterisk *, the port is either not
linked or is down. The possible field values are:
-
Unauthorized
Unauthorized and the port link is down, or the port control is Auto but a
client has not been authenticated via the port.
-
Force-Authorized —
and clients have full port access.
-
Single-host Lock —
been authenticated
-
Multiple Hosts —
enabled. One client
-
Multiple Sessions —
Sessions mode is enabled. At least one client has been authenticated.
-
Number of Violations
the interface in single-host mode, from a host whose MAC address is not
the supplicant MAC address.
Modifying Authentication Settings
Click the Edit button. The
— Indicates that either the port control is Force
Indicates that the port control is Forced Authorized,
Indicates that the port control is Auto and only a single client has
via the port.
Indicates that the port control is Auto and Multiple Hosts mode is
has been authenticated.
Indicates that the port control is Auto and Multiple
— Indicates the number of packets that arrived on
Edit Authentication Page
opens:
4
89