Configuring Quality of Service
Defining General Settings
STEP 1
STEP 2
STEP 3
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Mapping CoS to Queue
Cos to Queue Page
The
queues.
Click Quality of Service > General > CoS to Queue. The
Cos to Queue Page
Cos to Queue Page
The
•
Restore Defaults — Restores all queues to the default CoS settings.
•
Class of Service — Specifies the CoS VLAN (CoS) priority tag values, where
zero is the lowest and 7 is the highest.
•
Queue — Defines the traffic forwarding queue to which the CoS priority is
mapped. Four traffic priority queues are supported, where Queue 4 is the
highest and Queue 1 is the lowest.
Define the relevant mapping.
Click Apply. CoS to queues are mapped, and the device is updated.
contains fields for classifying CoS settings to traffic
contains the following fields:
11
Cos to Queue Page
opens:
278