Cisco SGE2000 - - Gigabit Switch Administration Manual page 293

Configuring Quality of Service
Defining General Settings
STEP 3
STEP 4
STEP 1
STEP 2
Cisco Small Business SFE/SGE Managed Switches Administration Guide
Add VLAN Rate Limit Page
Add VLAN Rate Limit Page
The
•
VLAN ID – Defines the VLAN on which to apply the Rate Limit.
•
Rate Limit (CIR) – Defines the maximum rate (CIR) in kbits per second (bps) that
forwarding traffic is permitted in the VLAN.
•
Burst Size (CbS) – Defines the maximum burst size (CbS) in bytes that
forwarding traffic is permitted through the VLAN.
Define the relevant fields.
Click Apply. The VLAN Rate Limit is added, and the device is updated.
Modifying the VLAN Rate Limit
Click Quality of Service > General > VLAN Rate Limit. The
opens:
Click the Edit button. The
contains the following fields.
VLAN Rate Limit Page
VLAN Rate Limit Page
opens:
11
284