Cisco SGE2000 - - Gigabit Switch Administration Manual page 211

Configuring IP Information
IP Addressing
STEP 3
STEP 4
STEP 5
Cisco Small Business SFE/SGE Managed Switches Administration Guide
•
IPv6 Address — Defines the currently configured IPv6 network assigned to
the interface. The address must be a valid IPv6 address, specified in
hexadecimal using 16-bit values between colons.
•
MAC Address — Indicates the MAC address mapped to the specified IPv6
address.
•
Type — Select the type of the neighbor discovery cache information entry.
The possible field values are:
-
Static
— Shows static neighbor discovery cache entries.
-
Dynamic
— Shows dynamic neighbor discovery cache entries.
Click the Add button. The
Add IPv6 Neighbors Page
The
gateway.
Add IPv6 Neighbors Page
The Add IPv6 Neighbors Page contains the following fields:
•
Interface — Indicates the neighboring IPv6 interface type. The possible field
values are:
-
VLAN
— Displays the neighboring IPv6 VLAN..
•
IPv6 Address — Indicates the IPv6 network assigned to the interface. The
address must be a valid IPv6 address, specified in hexadecimal using 16-
bit values between colons.
•
MAC Address — Indicates the MAC address mapped to the specified IPv6
address.
Define the relevant fields.
Click Apply. The device is updated.
Add IPv6 Neighbors Page opens:
provides information for adding a static default
7
202