Defining Dhcp Relay - Cisco ESW 500 Administration Manual

Configuring IP Information

Defining DHCP Relay

STEP 2
STEP 3
Defining DHCP Relay
ESW 500 Series Switches Administration Guide
•
Active Default Gateway — Active default gateway's IP Address.
•
Remove User Defined — Removes the selected IP address from the interface.
The possible field values are:
-
Checked
— Removes the IP address from the interface.
-
Unchecked
Define the relevant fields.
Click Apply. The IP information is defined, and the device is updated.
DHCP Server Page
The
multiple DHCP servers to ensure redundancy.
The DHCP servers act as a DHCP relay if the parameter is not equal to 0.0.0.0.
DHCP requests are relayed only if their SEC field is greater or equal to the
threshold value. This allows local DHCP Servers to respond first.
To define the DHCP Relay configuration:
— Maintains the IP address assigned to the Interface.
enables users to establish a DHCP configuration with
8
232