Table of Contents
Advertisement
VLAN Management
Creating VLANs
Creating VLANs
STEP 1
STEP 2
STEP 3
STEP 4
Configuring VLAN Interface Settings
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
The Create VLAN page enables you to define and configure VLANs on the
network. To display this page VLAN Management > Create VLAN in the
navigation window.
The VLAN Table displays the VLAN ID, name, if one exists, and type for the pre-
configured VLAN (VLAN ID 1) and any VLANs that you add. One port must be
configured as the Default VLAN. The type for all other ports is Static. The switch is
pre-configured with VLAN ID 1 as the Default VLAN. All ports are members of this
VLAN, and use its VLAN ID (1) as their PVID.
If you create additional VLANs, you can configure one of them as the Default VLAN.
(See
Setting the Default
A Static VLAN can be deleted. However, VLAN ID 1 cannot be deleted, even if it is
configured as a Static VLAN.
You can create up to 16 VLANs, and assign VLAN IDs up to 4094. To create a new
VLAN or a range of VLANs:
Click Add.
Select VLAN and enter a VLAN ID.
Or, create a range of VLANs by selecting Range and specifying the beginning and
ending VLAN IDs in the range.
If you are creating a single VLAN, you can enter an optional VLAN name for easy
reference.
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
You can use the Interface Settings page to view and configure port VLAN tagging
capabilities. To display this page click VLAN Management > Interface Settings in
the navigation window.
The Interface Setting Table shows the VLAN configuration for each port. To display
the VLAN configuration on link aggregation groups, select LAG from the Interface
Type list.
VLAN.) The configured Default VLAN cannot be deleted.
6
95
Advertisement
Table of Contents
