Oil Lubrication - Duerkopp Adler 868 Service Instructions Manual

3.

Oil lubrication

60
Caution: Risk of injury !
Oil can cause skin eruption.
Avoid a longer contact with the skin.
Wash yourself thoroughly after a contact.
ATTENTION !
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Protect your environment.
Be careful not to spill any oil..
Oil the special sewing machine exclusively with the lubricating oil
DA-10 or an equivalent oil with the following specification:
–
Viscosity at 40° C:
–
Ignition point:
DA-10 can be bought at the sales points of DÜRKOPP ADLER AG
under the following parts number:
250 ml-Container:
1-Litre-Container:
2-Litre-Container:
5-Litre-Container:
Lubrication of the machine head
–
The machine head is equipped with a central oil wick lubrication.
All bearings are supplied by the oil reservoir 1.
The oil level must not drop below the marking "MIN".
–
Fill up oil up to the marking "MAX" through the drill-holes in the
–
inspection glass.
10 mm²/s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
1