5.7
Replacing the needle
1
14
CAUTION: danger of injury!
Turn off the main switch!
The needle may only be threaded and replaced when the sewing
machine is switched off.
–
Turn the handwheel until the needle bar has reached its top dead
centre.
–
Undo screw 1.
–
Remove needle.
–
Insert the new needle with its channel towards the hook and push it
up as far as it will go.
–
Tighten screw 1.
CAUTION:
If a needle of a different thickness is fitted the settings must ?be
altered as specified in the servicing instructions.
A thinner needle may cause faulty stitches or damage to the thread.
A thicker needle may damage the hook point itself.