Adjusting The Pick-Up/Feeding Roller Pressure (Multifeeder); Positioning The Pick-Up Roller Releasing Solenoid (Multifeeder) - Canon NP6045 Service Manual

9. Adjusting the Pick-Up/Feeding Roller Pressure (multifeeder)

If double feeding or pick-up failure occurs during pick-up, adjust the position of the
pressure spring of the separation roller:
• If double feeding occurs, move the position of the spring hook on side A.
• If pick-up failure occurs, move the spring hook on side B.

10. Positioning the Pick-Up Roller Releasing Solenoid (multifeeder)

Make adjustments by sliding the solenoid in the direction of A so that the gap
between the shutter
pulled.
COPYRIGHT © 1997 CANON INC.
B
A
Figure 5-816
and the shutter plate
A
Figure 5-817
Figure 5-818
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
is 0.4 ±0.2 mm when the solenoid is
5-61