Screen/Button Settings; Line Monitor Volume; Ringing Volume - Xerox WorkCentre 7132 User Manual

10 Setups

Line Monitor Volume

Specifies the volume level of the tone generated for the line monitor, which allows you
to hear call and response signals when connecting to a destination.

Ringing Volume

Specifies the volume level of the tone generated when a call is received.
Stored Programming Tone
Specifies the volume level of the tone generated each time operation is performed
during job memory registration. You cannot completely turn off the volume for this tone.
Auto Clear Alert Tone
Specifies the volume level of the tone generated just before the machine performs auto
clear.
Base Tone
Specifies the volume level of the base tone generated when you toggle settings. The
machine emits a base tone when it exits the interrupted mode.

Screen/Button Settings

This feature allows you to customize the initial screen and select the initial language to
be displayed on the touch screen.
1.
Select [Screen/Button Settings]
on the [Common Settings]
screen.
2.
Change the required settings.
Use the side tabs to switch
between screens.
3.
Select [Close].
Screen Default at Power On
Specifies the initial screen to be displayed when the machine is switched on. Set the
preset initial screen to the Features, Job Status, or the Machine Status screen. For
information on these screens, refer to the Job Status chapter and the Machine Status
chapter.
Features Screen Default
Specifies the default features to be displayed when canceling the Power Saver mode.
Use the scroll bars to switch between screens.
Screen After Auto Clear
Specifies the features screen to be displayed after the machine performs auto clear.
224 Xerox WorkCentre 7132 User Guide