Xerox WorkCentre 7132 User Manual page 162

7 Print
Parameter
Scale
Scale Mode
Active Area
Determining
Command
Paper
Margin
Image
Enhance
162
Item No.
159 0: OFF
1: ON (Default)
Sets whether scaling is performed to enlarge or reduce the document size to
fit the paper size.
160 0: Paper size (Default)
1: Active coordinate area
Sets how the document size is specified when [Document Size] (101) is set
to [Auto] (99).
[Paper Size] Set the document size the minimum size that combines the
active coordinate area from the active coordinate determining method and
the active coordinate obtained by the settings of Origin Position and Paper
Margin.
[Active Coordinate Area] Set the document size the area from which the
paper margin is subtracted from the active coordinate area obtained by the
active coordinate determining method.
161 0: Auto (Default)
1: PS
2: IW
3: IP
4: Adapted
Sets the method for obtaining the active coordinate area.
[Auto] sets the method using PS, IW, IP, or Adapted.
[PS]: The rectangular area is defined by the area specified by the first [PS]
command.
[IW]: The rectangular area is defined by the area specified by the last [IW]
command.
[IP]: The rectangular area is defined by the area that encompasses all [IP]
commands.
[Adapted]: The rectangular area is defined by an area calculated from the
maximum/minimum coordinates of the area and the coordinates plotted by
the drawing commands, and the maximum size of characters and line widths
present on the page.
162 0-99: 0 to 99 mm (0: Default)
Sets the paper margins.
163 0: OFF
1: ON (Default)
Sets whether to artificially enhance the resolution and smooth edges.
Value
Xerox WorkCentre 7132 User Guide