Paper Jams - Xerox WorkCentre 7132 User Manual

15 Problem Solving

Paper Jams

When a sheet of paper jams inside the machine, the machine stops the operation and
beeps, and a message is displayed on the touch screen. Follow the instructions
displayed to remove the jammed paper.
Gently remove the paper taking care not to tear it. If paper is torn while it is being
removed from the machine, remove all the torn pieces making sure that none remain
inside. If a paper jam message is displayed again, paper is probably jammed at another
location. Clear this by following the message on the display.
When you have finished clearing a paper jam, printing automatically resumes from the
point before the paper jam occurred.
WARNING: When removing jammed paper, make sure that no bits of paper are
left in the machine, since they could cause more jams or even a fire. If a piece of
paper is stuck in a hidden area or wrapped around the fuser unit or rollers, do
not remove it forcefully; you could get injured or burned. Switch off the machine
immediately, and contact the Xerox Welcome Center.
This section describes how to clear paper jams in the following locations.
382
Document Feeder
Cover
Cover E
Cover A
Duplex Module
Cover D
Tray 5 (Bypass)
Cover B
Cover C
Document Feeder
Tray
Center Output Tray
Front Cover
Tray 1
Tray 2, 3 - Two
Tray Module
(Optional)
Xerox WorkCentre 7132 User Guide