User Information - Xerox WorkCentre 7132 User Manual

8 CentreWare Internet Services
Name
Protocols
Server Name
Port Number
Shared Name
Remote Path
User Name
Password
Re-enter Password
Pool
This page allows you to set up or change the pool setups.
Protocols
Server Name
Port Number
Shared Name
Remote Path
User Name
Password
Re-enter Password
Polling Settings
Polling Interval
Start Polling
General Settings
This page allows you to specify whether to print the log-in and/or domain names on the
job log list. Unchecked items will not be displayed on a job log.

User Information

Select the items to be listed on a job log.
• User Name
• Domain Name
178
Enter the name of the repository setup.
Select [FTP] or [SMB] for a transfer protocol.
Enter the name of the server to transfer scanned data.
Specify the port number.
When [SMB] is selected in [Protocols], you can enter the shared
name.
Enter the path in the server where the data will be saved.
Enter the user name.
Enter the password for the user name.
Re-enter the password for verification.
Select [FTP] or [SMB] for a transfer protocol.
Enter the name of the server to transfer scanned data.
Specify the port number.
When [SMB] is selected in [Protocols], you can enter the shared
name.
Enter the path in the server where the data will be saved.
Enter the user name.
Enter the password for the user name.
Re-enter the password for verification.
Select the check box to enable polling.
If polling is enabled, enter a polling interval in the range 0 to
1092:15 in 1-minute increments.
If polling is enabled, enter a start time in the range 0 to 23:59 in 1-
minute increments.
Xerox WorkCentre 7132 User Guide