Transmission Report; Communication Mode - Xerox WorkCentre 7132 User Manual

Send Header – page 107
Recipient Print Sets – page 108
Multiple-Up – page 108
Remote Mailbox – page 108
F Code – page 109
1.
Press the <All Services> button
on the control panel.
2.
Select [Fax] on the touch
screen.
3.
Select the [Transmission
Options] tab. Use the side tabs
to switch screens.
4.
Select the required feature.

Transmission Report

This feature automatically prints a report after each fax transmission indicating the
transmission result.
1.
Select [Transmission Report] on
the [Transmission Options]
screen.
2.
Select the required option.
3.
Select [Save].
Off
Disables the feature.
On
Automatically prints a report after each fax transmission is completed.

Communication Mode

This feature allows you to select the communication mode for fax transmissions.
1.
Select [Communication Mode]
on the [Transmission Options]
screen.
2.
Select the required option.
3.
Select [Save].
Xerox WorkCentre 7132 User Guide
Transmission Options - Fax
105