3 Copy
Combine Original Sets
This feature allows you to divide lengthy originals into smaller groups that can be
loaded into the document feeder in smaller quantities at a time.
1.
Select [Combine Original Sets]
on the [Job Assembly] screen.
2.
Select the required option.
3.
Select [Save].
Off
Disables the feature.
On
Enables the feature. Select [Next Original] on the screen to process the next group.
Select [Last Original] when all documents have been scanned.
NOTE: Use Build Job if you want to select different features for each group.
Delete Outside/Delete Inside
This feature allows you to delete everything inside or outside a specified area. Up to
three areas can be set.
1.
Select [Delete Outside/Delete
Inside] on the [Job Assembly]
screen.
2.
Select the required options.
3.
Select [Save].
Off
Disables the feature.
Delete Outside
Deletes everything outside the specified areas when copying.
Delete Inside
Deletes everything inside the specified areas when copying.
Area Settings
Allows you to select up to three areas from [Area 1] to [Area 3]. Displays the [Delete
Outside/Delete Inside - Area ×], where × is the number 1 to 3.
Originals
Select the side from which to delete for 2 Sided originals.
82
Xerox WorkCentre 7132 User Guide